Cisco 7945G Administration Manual page 90

Device Configuration Menu
Table 4-13 Media Configuration Menu Options (continued)
Option Description
Wideband Headset Indicates whether wideband is enabled or disabled for the
headset.
Default: Disabled
Enterprise Enables/disables Cisco Unified IP Phones to advertise the
Advertise G.722 G.722 codec to Cisco Unified Communications Manager. If
Codec enabled (default), and if each endpoint in the attempted call
supports G.722 in its capabilities set, Cisco Unified
Communications Manager will choose G.722 for the call.
Note
Device Advertise Allows you to override the Enterprise Advertise G.722
G.722 Codec Codec on a per-phone basis.
The default is "Use System Default," which means the value
configured for the Enterprise Advertise G.722 Codec
parameter gets used.
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
4-22
When a phone is registered with a Cisco Unified
Communications Manager that does not support
this setting, the default is "Disabled."
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
If Wideband Headset UI Control is
•
enabled, you or the user can use the
phone and choose
Preferences > Audio Preferences >
Wideband Headset.
If Wideband Headset UI Control is
•
disabled, from Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration to set
this value.
If you allowed this option to be
Note
user controllable (in the
Wideband Headset UI Control
option), the user-configured value
takes precedence.
From Cisco Unified Communications
Manager Administration, choose System
> Enterprise Parameters.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone.
> User
OL-17755-01