Cisco 7945G Administration Manual page 187

Feature Support by Protocol for the Cisco Unified
IP Phone 7965G and 7945G
This appendix provides information about feature support for the Cisco Unified IP Phone 7965G and
7945G using the SCCP or SIP protocol with Cisco Unified Communications Manager Release 6.1(3).
Table B-1
focuses primarily on end-user calling features and is not intended to represent a comprehensive listing
of all available phone features.
Table B-1
Phone Guide for Cisco Unified Communications Manager 6.1(3), which is available at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html
Table B-1 Cisco Unified IP Phone 7965G and 7945G Feature Support by Protocol
Features
Calling Features
Abbreviated Dialing
Answer Release
Audible Message Waiting Indicator Supported
Auto Answer
Auto Dial
Barge (and cBarge)
Busy Lamp Field (BLF) Call Lists
Busy Lamp Field (BLF) Speed Dial Supported
Busy Lamp Field (BLF) Speed Dial Supported
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
provides a high-level overview of calling features and their support by protocol. This table
also provides references to appropriate sections in Cisco Unified IP Phone 7965G and 7945G
Cisco Unified IP Phone 7965G
and 7945G
SCCP SIP
Supported Supported
Supported Supported
Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported
Supported
A P P E N D I X
For More Information
"Basic Call Handling—Placing a Call: Additional
Options"
"Accessing Voice Messages"
"Using a Handset, Headset, and
Speakerphone—Using Auto Answer"
"Basic Call Handling—Placing a Call: Basic
Options"
"Advanced Call Handling—Using a Shared Line"
"Advanced Call Handling—Determining if Another
Line is Busy or Idle"
"Advanced Call Handling—Determining if Another
Line is Busy or Idle"
"Advanced Call Handling—Using BLF to Determine
a Line State"
B
B-1