Model Information Screen; Status Menu - Cisco 7945G Administration Manual

Model Information Screen

Model Information Screen
The Model Information screen includes the options that are described in
To display the Model Information screen, press the Settings button and then select Model Information.
To exit the Model Information screen, press the Exit softkey.
Table 7-1 Model Information Settings
Option Description
Model Number Model number of the phone.
MAC Address MAC address of the phone.
Load File Identifier of the factory-installed load running on
the phone.
Boot Load ID Identifier of the factory-installed load running on
the phone.
Serial Number Serial number of the phone.
CTL Displays the MD5 hash of the certificate trust list
(CTL) file that is installed in the phone. If no CTL
file is installed on the phone, this field displays No.
(If security is configured for the phone, the CTL file
installs automatically when the phone reboots or
resets).
MIC Indicates whether a manufacturing installed
certificate (used for the security features) is installed
on the phone (Yes) or is not installed on the phone
(No).
LSC Indicates whether a locally significant certificate
(used for the security features) is installed on the
phone (Yes) or is not installed on the phone (No).
Call Control Indicates whether the phone is running under SCCP
Protocol or SIP.

Status Menu

The Status menu includes these options, which provide information about the phone and its operation:
•
•
•
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
7-2
Chapter 7
Status Messages—Displays the Status Messages screen, which shows a log of important system
messages. For more information, see the
Network Statistics—Displays the Network Statistics screen, which shows Ethernet traffic statistics.
For more information, see the
Firmware Versions—Displays the Firmware Versions screen, which shows information about the
firmware running on the phone. For more information, see the
on page 7-9.
Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
To Change
Display only—Cannot configure.
Display only—Cannot configure.
Display only—Cannot configure.
Display only—Cannot configure.
Display only—Cannot configure.
For more information about this file, refer to
Cisco Unified Communications Manager
Security Guide.
For information about how to manage the MIC
for your phone, refer to the "Using the Certificate
Authority Proxy Function" section in Cisco
Unified Communications Manager Security
Guide.
For information about how to manage the LSC
for your phone, refer to the "Using the Certificate
Authority Proxy Function" section in Cisco
Unified Communications Manager Security
Guide.
See the
Different Protocols" section on page
"Status Messages Screen" section on page
"Network Statistics Screen" section on page
Table 7-1.
"Using Cisco Unified IP Phones with
7-8.
"Firmware Versions Screen" section
2-11.
7-3.
OL-17755-01