Cisco 7945G Administration Manual page 150

Network Configuration
Table 8-1
Item
Boot Load ID
Version
Expansion Module 1
Expansion Module 2
Hardware Revision
Serial Number
Model Number
Message Waiting
UDI
Time
Time Zone
Date
1. The Version Identifier field might display blank if using an older model Cisco Unified IP Phone because the hardware does
Network Configuration
The Network Configuration area on a phone's web page displays network configuration information and
information about other phone settings.
You can view and set many of these items from the Network Configuration Menu and the Device
Configuration Menu on the Cisco Unified IP Phone. For more information, see
Features, Templates, Services, and Users."
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
8-4
Device Information Area Items (continued)
Description
Identifier of the factory-installed load running on the phone
Version of the firmware running on the phone
Phone load ID for the first Cisco Unified IP Phone Expansion Module
Phone load ID for the second Cisco Unified IP Phone Expansion Module
Revision value of the phone hardware
Serial number of the phone
Model number of the phone
Indicates if there is a voice message waiting on any line for this phone
Displays the following Cisco Unique Device Identifier (UDI) information
about the phone:
Device Type—Indicates hardware type. For example, phone displays for
•
all phone models
Device Description—Displays the name of the phone associated with the
•
indicated model type
• Product Identifier—Specifies the phone model
Version Identifier
•
Serial Number—Displays the phone's unique serial number
•
Time obtained from the Date/Time Group in Cisco Unified Communications
Manager to which the phone belongs
Timezone obtained from the Date/Time Group in Cisco Unified
Communications Manager to which the phone belongs
Date obtained from the Date/Time Group in Cisco Unified Communications
Manager to which the phone belongs
not provide this information.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
1
—Represents the hardware version of the phone
Table 8-2 describes this information.
Chapter 5, "Configuring
OL-17755-01