Cisco 7945G Administration Manual page 133

Chapter 6 Customizing the Cisco Unified IP Phone
Table 6-1
Field
Display On
Duration
Display Idle
Timeout
Display On If
Incoming Call
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Display On and Off Configuration Fields (continued)
Description
Length of time that the display remains on after turning on
at the time specified in the Display On Time field.
Enter the value in this field in the format hours:minutes.
For example, to keep the display on for 4 hours and 30
minutes after it turns on automatically, enter 4:30.
If this field is blank, the phone will turn off at the end of
the day (0:00).
If Display On Time is 0:00 and the display on
Note
duration is blank (or 24:00), the display will remain
on continuously.
Length of time that the phone is idle before the display
turns off. Applies only when the display was off as
scheduled and was turned on by an end-user (by pressing a
button on the phone or lifting the handset).
Enter the value in this field in the format hours:minutes.
For example, to turn the display off when the phone is idle
for 1 hour and 30 minutes after an end-user turns the
display on, enter 1:30.
The default value is 0:30.
Disable/enable automatic illumination of the LCD screen
when a call is received.
Default: Disabled
Automatically Disabling the Cisco Unified IP Phone Screen
6-9