Cisco 7945G Administration Manual page 96

Device Configuration Menu
Table 4-18 Network Configuration Menu Options (continued)
Option Description
CDP: PC Port Indicates whether CDP is supported on the PC port
(default is enabled).
Enable CDP on the PC port when Cisco VT
Advantage/Unified Video Advantage (CVTA) is
connected to the PC port. CVTA does not work without
CDP interaction with the phone.
Note
Note
CDP: SW Port Indicates whether CDP is supported on the switch port
(default is enabled).
•
•
Note
Note
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
4-28
When CDP is disabled in Cisco Unified
Communications Manager, a warning is
displayed, indicating that disabling CDP on the
PC port prevents CVTA from working.
The current PC and switch port CDP values are
shown on the Settings menu.
Enable CDP on the switch port for VLAN
assignment for the phone, power negotiation, QoS
management, and 802.1x security.
Enable CDP on the switch port when the phone is
connected to a Cisco switch.
When CDP is disabled in Cisco Unified
Communications Manager, a warning is
presented, indicating that CDP should be
disabled on the switch port only if the phone is
connected to a non-Cisco switch.
The current PC and switch port CDP values are
shown on the Settings menu.
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
From Cisco Unified Communications
Manager Administration, choose
Device > Phone.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone.
OL-17755-01