Ethernet Configuration Menu - Cisco 7945G Administration Manual

Device Configuration Menu

Ethernet Configuration Menu

The Ethernet Configuration menu includes the options that are described in
Table 4-15 Ethernet Configuration Menu Option
Option Description
Span to PC Port Indicates whether the phone will forward packets transmitted
and received on the network port to the access port.
Enable this option if an application that requires monitoring
of the phone's traffic is being run on the access port. These
applications include monitoring and recording applications
(common in call center environments) and network packet
capture tools that are used for diagnostic purposes.
Forwarding Indicates whether the internal switch begins forwarding
Delay packets between the PC port and switched port on the phone
when the phone becomes active.
• When forwarding delay is set to disabled, the internal
switch begins forwarding packets immediately.
• When forwarding delay is set to enabled, the internal
switch waits eight seconds before forwarding packets
between the PC port and the switch port.
Default is disabled.
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
4-24
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table
To Change
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
4-15.
OL-17755-01