Media Configuration Menu - Cisco 7945G Administration Manual

Device Configuration Menu

Media Configuration Menu

The Media Configuration menu displays whether the headset, speakerphone, and video capability are
enabled on the phone. This menu also displays options for recording tones that the phone may play to
indicate that a call may be recorded.
Table 4-13 Media Configuration Menu Options
Option Description
Headset Enabled Indicates whether the Headset button is enabled on the
phone.
Headset Indicates whether the wireless headset hookswitch feature
Hookswitch is enabled on the phone.
Control Enabled
Speaker Enabled Indicates whether the speakerphone is enabled on the
phone.
Video Capability Indicates whether the phone can participate in video calls
Enabled when connected to an appropriately equipped computer.
Recording Tone Indicates whether a recording tone (often referred to as a
beep tone) is enabled or disabled for the phone. If the
recording tone option is enabled, the phone plays the beep
tone in both directions of every call, regardless of whether
the call actually gets recorded. The beep tone first sounds
when a call is answered.
You may want to notify your users if you enable this option.
Default: Disabled
Related Parameters:
•
•
•
Other related parameters—Beep tone frequency in hz, the
length of the beep tone (called duration), and how often the
beep tone plays (called interval)—are defined on a
per-Network Locale basis in the xml file that defines tones.
This xml file is usually named tones.xml or g3-tones.xml.
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
4-20
Recording Tone Local Volume
Recording Tone Remote Volume
Recording Tone Duration
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-13 describes the options on this menu.
To Change
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone >
Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
OL-17755-01