Cisco 7945G Administration Manual page 116

Telephony Features Available for the Phone
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Programmable Line The administrator can assign features to line buttons.
Keys Softkeys normally control these features; for example,
New Call, Call Back, End Call, and Forward All. When
the administrator configures these features on the line
buttons, they always remain visible, so users can have a
"hard" New Call key.
Quality Reporting Allows users to use the QRT softkey on a phone to
Tool (QRT) submit information about problem phone calls. QRT can
be configured for either of two user modes, depending
upon the amount of user interaction desired with QRT.
Redial Allows users to call the most recently dialed phone
number by pressing a softkey.
Ring setting Identifies ring type used for a line when a phone has
another active call.
Secure Conference
•
•
•
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
5-12
Allows secure phones to place conference calls by
using a secured conference bridge.
As new participants are added by using Confrn,
Join, cBarge, Barge softkeys or MeetMe
conferencing, the secure call icon displays as long
as all participants use secure phones.
The Conference List displays the security level of
each conference participant. Initiators can remove
non-secure participants from the Conference List.
(Non-initiators can add or remove conference
participants if the Advanced Adhoc Conference
Enabled parameter is set.)
Chapter 5 Configuring Features, Templates, Services, and Users
Configuration Reference
For more information refer to:
Cisco Unified Communications Manager
•
System Guide, "Cisco Unified IP Phone"
chapter.
Cisco Unified Communications Manager
•
Administration Guide, "Phone Button
Template Configuration" chapter.
Cisco Unified Communications Manager
•
Administration Guide "Modifying Phone
Button Templates" chapter.
For more information refer to:
Cisco Unified Communications Manager
•
System Guide, "Cisco Unified IP
Phones" chapter.
Cisco Unified Communications Manager
•
Features and Services Guide, "Quality
Report Tool" chapter.
Requires no configuration.
For more information refer to:
Cisco Unified Communications Manager
•
Administration Guide, "Directory
Number Configuration" chapter.
"Creating Custom Phone Rings" section
•
on page 6-2.
For more information about security, see the
"Overview of Supported Security Features"
section.
For additional information, refer to these:
Cisco Unified Communications Manager
•
System Guide, "Conference Bridges"
chapter
Cisco Unified Communications Manager
•
Administration Guide, "Conference
Bridge Configuration" chapter
Cisco Unified Communications Manager
•
Security Guide.
OL-17755-01