Cisco 7945G Administration Manual page 87

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-12 UI Configuration Menu Options (continued)
Option Description
Auto Call Select Indicates whether the phone automatically shifts the call
focus to an incoming call on the same line when the user is
already on a call.
When this option is enabled, the phone shifts the call focus
to the most recent incoming call.
When this option is disabled, all automatic focus changes,
including Auto Line Select, are disabled regardless of their
setting.
Default: Enabled
"more" Softkey Indicates the number of seconds that additional softkeys are
Timer displayed after the user presses more. If this timer expires
before the user presses another softkey, the display reverts
to the initial softkeys.
Range: 5 to 30; 0 represents an infinite timer.
Default: 5
Wideband Headset Indicates whether the user can configure the Wideband
UI Control Headset option in the phone user interface.
Values:
•
•
Default: Enabled
Single Button Allows users to press a line key to Barge or cBarge into a
Barge (SCCP remote-in-use call on a shared line.
phones only)
Personalization Indicates whether the phone has been enabled for
configuring custom ring tones and wallpaper images.
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Enabled—The user can configure the Wideband
Headset option in the Audio Preferences menu on the
phone (choose > User Preferences > Audio
Preferences> Wideband Headset).
Disabled—The value of the Wideband Headset option
in Cisco Unified Communications Manager
Administration gets used (see
Menu, page 4-20).
To Change
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
Media Configuration
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
Device Configuration Menu
4-19