Giving Users Access To The User Options Web Pages; Specifying Options That Appear On The User Options Web Pages - Cisco 7945G Administration Manual

Managing the User Options Web Pages

Giving Users Access to the User Options Web Pages

Before a user can access the User Options web pages, you must use Cisco Unified Communications
Manager Administration to add the user to a standard Cisco Unified Communications Manager end user
group. To do so, choose User Management > User Group. You must also associate appropriate phones
with the user. To perform these procedures, from Cisco Unified Communications Manager
Administration, choose User Management > End User.
For additional information, refer to Cisco Unified Communications Manager Administration Guide,
"End User Configuration" section.

Specifying Options that Appear on the User Options Web Pages

Most options that are on the User Options web pages appear by default. However, the following options
must be set by the system administrator by using Enterprise Parameters Configuration settings in Cisco
Unified Communications Manager Administration:
•
•
•
The settings apply to all User Options web pages at your site.
Note
To specify the options that appear on the User Options web pages, follow these steps:
Procedure
From Cisco Unified Communications Manager Administration, choose System > Enterprise
Step 1
Parameters.
The Enterprise Parameters Configuration window appears.
In the CCMUser Parameters area, specify whether a parameter appears on the User Options web pages
Step 2
by choosing one of these values from the Parameter Value drop-down list box for the parameter:
•
•
•
•
•
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
5-20
Show Ring Settings
Show Line Text Label Settings
Show Call Forwarding
True—Option displays on the User Options web pages (default).
False—Option does not display on the User Options web pages.
Show All Settings—All call forward settings display on the User Options web pages (default).
Hide All Settings—No call forward settings display on the User Options web pages.
Show Only Call Forward All—Only call forward all calls displays on the User Options web pages.
Chapter 5 Configuring Features, Templates, Services, and Users
OL-17755-01