Firmware Versions Screen; Expansion Module(S) Screen (Sccp Phones Only) - Cisco 7945G Administration Manual

Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Table 7-3
Item
Port 2
DHCP BOUND

Firmware Versions Screen

The Firmware Versions screen displays information about the firmware version that is running on the
phone.
To display the Firmware Version screen, follow these steps:
Procedure
Press the Settings button.
Step 1
Select Status.
Step 2
Select Firmware Versions.
Step 3
To exit the Firmware Version screen, press the Exit softkey.
Table 7-4
Item
Load File
App Load ID
JVM Load ID
OS Load ID
Boot Load ID
Expansion Module 1
Expansion Module 2
DSP Load ID

Expansion Module(s) Screen (SCCP Phones Only)

The Expansion Module(s) screen displays information about each Cisco Unified IP Phone Expansion
Module that is connected to the phone. This screen appears on SCCP phones only.
Table 7-5
You can use this information to troubleshoot the expansion module, if necessary. In the Expansion
Module(s) screen, a statistic preceded by "A" is for the first expansion module. A statistic preceded by
"B" is for the second expansion module.
To display the Expansion Module(s) screen, follow these steps:
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Network Statistics Message Components (continued)
Table 7-4 explains the information that is displayed on this screen.
Firmware Version Information
Description
Load file running on the phone
Identifies the JAR file running on the phone
Identifies the Java Virtual Machine (JVM) running on the phone
Identifies the operating system running on the phone
Identifies the factory-installed load running on the phone
Identifies the load running on the Expansion Module(s).
Identifies the digital signal processor (DSP) software version used
explains the information that is displayed on this screen for each connected expansion module.
Description
Link state and connection of the Network port
Phone is bound to the DHCP server, DHCP parameters are
acceptable, and the phone has received a DHCPACK message.
Status Menu
7-9