Steering Lock Replacement - Honda S2000 Service Manual

Steering Lock Replacement
1. Remove the steering column (see page 17-9),
2. Center DUnch each of the two shear bolts, and drill
their heads off with a 5 mm {3/16 in.) drill bit. Be
careful not to damage the switch body when
removing the shear bolts.
;-:' '
5 .
6 .
7 .
Remove the shear bolts from the switch body.
Install the switch body without the key inserted.
Loosely tighten the new shear bolts.
Insert the ignition key. and check for proper
operation of the steering wheel lock and that the
ignition key turns ireely.
Tighten the shear bolts (A) untilthe hex heads (B)
twist off.
A
17-13