Clutch Disc And Pressure Plate Installation - Honda S2000 Service Manual

Clutch Disc and Pressure Plate Installation
1 . A p p l y a t h i n , u n i f o r m c o a t o f s u p e r h i g h t e m p u r e a
grease (P/N 08798-9002) to the splines (A) of the
c l u t c h d i s c ( B ) . S l i d e t h e c l u t c h d i s c o n t o t h e
mainshaft, and remove extra overflow grease.
2 . I n s t a l l t h e r i n g g e a r h o l d e r .
t €^"
' ' (4_9!E!-E!_it
Pl ,',
o7s36'371o10o
I lt ,.,,.
0TLAF -PIoo11o
l l , / '
t'lt'
t J z B
(P/N 08798-9002t
4 .
Installthe clutch disc using the special tools.
Apply super high temp urea grease {P/N 08798-
9002) into the groove (A) of the release bearing {B}.
then installthe release bearing on the pressure
plate (C).
Installthe pressure plate and the mounting bolts
( D l f i n g e r t i g h t . M a k e s u r e t h e r e l e a s e b e a r i n g d o e s
not come off.
+'iFEASEH
lPlN 08798-90021
07LAB-PV00'100
. 5.
=== 07924-PD20003
4!::--!-\. . /
\ \ _ |
'.a'
1 , , ,
,g;
...
6. Torque the mounting bolts in a crisscross pattern.
Tighten the bolts in several steps to prevent
w a r p i n g t h e d i a p h r a g m s p r i n g .
PRESSUBE PLATE MOUNTING BOLT TOROUE:
25 N.m (2.6 kgf.m, r9lbf'ft)
/zo - o\
/@^ -.
6\
O i . _ ,
l O
t
- .
u
.\Qo
9,'
1 .
Remove the special tools.
M a k e s u r e t h e d i a p h r a g m s p r i n g f i n g e r s a r e a l l t h e
same height.
12-11