High Mount Brake Light Replacement; License Plate Light Replacement - Honda S2000 Service Manual

High Mount Brake Light
Replacement
4 .
O p e n t h e t r u n k l i d .
Disconnect the 2P connector (A) from the high
m o u n t b r a k e l i g h t ( B ) .
Remove the five mounting nuts, then pull out the
high mount brake light.
Install the high mount brake light in the reverse
order of removal.
After installing the high mount brake light, run
water over it to make sure it does not leak.
1 .
2 .
License Plate Light Replacement
1 . Remove the license plate light assembly, and
disconnect the 2P connector from it.
License Plate Light Bulb;5 W
:
2. Take the lens off. then reolace the bulb.
22-75