Steering Lock Replacement - Honda Civic 2002-2003 Service Manual

Steering
Steering Lock Replacement
NOTE: Do not try to re-key a replacement steering lock.
If necessary, re-key the other locks.
1. Remove the steering column (see page 17-91.
2. Center punch each of the two shear bolts (AI, and
drill their heads off with a 5 mm (3/16 in.1 drill bit.
Be careful not to damage the switch body when
removing the shear bolts.
A
3. Remove the shear bolts from the switch body.
4. Install the switch body without the key inserted.
5. Loosely tighten the new shear bolts.
6. Insert the ignition key, and check for proper
operation olthe steering wheel lock and thatthe
ignition key turns freely.
17-12
7. Tighten the shear bolts (AI until the hex heads (BI
twist off.
A
I
o
EIO~I
. . " , . . . . . .
:J
I
B