Clutch Pedal Position Switch Test; Brake Pedal Position Switch Test - Honda S2000 Service Manual

Clutch Pedal Position Switch Test
1. Disconnect the connector from the clutch Dedal
Dosition switch, then remove the switch.
Checkthe clutch Dedal oosition switch connector
terminals for continuity. There should be continuity
between the terminals with the button (A) released,
and there should be continuity with the button
pressed.
CLUTCH PEDAI- POSITION SWITCH CONNECTOR
T e r m i n a l s i d e o f m a l e t e r m i n a l s
lf the clutch pedal position switch is faulty, replace
rt.
Installthe clutch pedal position switch. and adjust it
(see page l2-4).
Brake Pedal Position Switch Test
1. Disconnectthe brake pedal position switch
connector, and remove the switch.
2. Check for continuity between the No. 1 and the
No. 4 terminals of the brake pedal position switch
connector. There should be continuity when the
button (A) is pressed.
BRAKE PEDAL POSITION SWITCH CONNECTOR
t----r------l
l l r | 2 l l
I I
t---T---'tl
l l 3 4 ) l
I L_____r_______r
I
Terminal side of male terminals
3. Check for continuity between the No. 2 and the
No. 3 terminals. There should be continuity when
the button is released.
4. lf the brake pedal position switch is faulty, replace
rt.
5. Installthe brake pedal position switch, and adjust it
(see page 19-6).
4-47