Poe (Gs110Tp Only); Poe Configuration - NETGEAR GS110TP - ProSafe Gigabit Smart Switch Software Administration Manual

PoE (GS110TP Only)

Ports g1–g8 on the GS110TP are IEEE802.3af-compliant ports. Each port is capable of
delivering up to 15.4W of reliable, uninterrupted power to connected PoE-powered devices
(PD). The GS110TP can provide a total of 46W of power to all connected devices. You can
configure per-port priority settings, timers, and power limits to manage the power supplied to
the connected PDs and to ensure that the GS110TP power budget is used effectively.
From the PoE link under the System tab, you can view and configure PoE settings for the
switch and for ports g1–g8.
From the PoE link, you can access the following pages:
•

PoE Configuration

• PoE Port Configuration
• Timer Global Configuration
• Timer Schedule Configuration
PoE Configuration
Use the PoE Configuration page to view global PoE power information and to configure PoE
SNMP trap settings.
To display the PoE Configuration page, click System  PoE  Basic  PoE Configuration.
You can also access the PoE Configuration page by clicking System
Note:
 PoE  Advanced  PoE Configuration.
48 | Chapter 2: Configuring System Information
GS108T and GS110TP Smart Switch Software Administration Manual
on page 48
on page 49
on page 51
on page 52