Ip Rules - NETGEAR GS110TP - ProSafe Gigabit Smart Switch Software Administration Manual

To delete an IP ACL, select the check box next to the IP ACL ID field, then click Delete.
2.
To change the name of an IP ACL, select the check box next to the IP ACL ID field, update
3.
the name, then click Apply.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
4.
the latest value of the switch.

IP Rules

Use the IP Rules page to define rules for IP-based standard ACLs. The access list definition
includes rules that specify whether traffic matching the criteria is forwarded normally or
discarded.
There is an implicit "deny all" rule at the end of an ACL list. This
Note:
means that if an ACL is applied to a packet and if none of the explicit
rules match, then the final implicit "deny all" rule applies and the
packet is dropped.
To display the IP Rules page, click Security  ACL, then click the Advanced  IP Rules link.
To configure rules for an IP ACL:
To add an IP ACL rule, select the ACL ID to add the rule to, complete the fields
1.
described in the following list, and click Add.
Rule ID. Specify a number from 1–10 to identify the IP ACL rule. You can create up to
•
10 rules for each ACL.
Action. Selects the ACL forwarding action, which is one of the following:
•
Permit. Forwards packets which meet the ACL criteria.
•
Deny. Drops packets which meet the ACL criteria.
•
188 | Chapter 5: Managing Device Security
GS108T and GS110TP Smart Switch Software Administration Manual