Mac Filter Summary; Mac Filter - NETGEAR GS110TP - ProSafe Gigabit Smart Switch Software Administration Manual

GS108T and GS110TP Smart Switch Software Administration Manual

MAC Filter Summary

Use the MAC Filter Summary page to view the MAC filters that are configured on the system.
To display the MAC Filter Summary page, click Security  Traffic Control, and then click the
MAC Filter  MAC Filter Summary link.
The following table describes the information displayed on the page:
Field
MAC Address
VLAN ID
Source Port Members Displays the ports included in the inbound filter.
Destination Port
Members
Click Refresh to update the page with the most current information.
Description
Identifies the MAC address that is filtered.
The VLAN ID used with the MAC address to fully identify packets you want filtered.
You can only change this field when you have selected the Create Filter option.
Displays the ports included in the outbound filter.
Chapter 5: Managing Device Security | 173