Reset; Device Reboot - NETGEAR GS110TP - ProSafe Gigabit Smart Switch Software Administration Manual

Reset

The Reset menu contains links to the following options:
•

Device Reboot

• Factory Default
Device Reboot
Use the Device Reboot page to reboot the GS108T or GS110TP.
To access the Device Reboot page, click Maintenance  Reset  Device Reboot.
To reboot the switch:
Select the check box on the page.
1.
Click Apply. The switch resets immediately. The management interface is not available until
2.
the switch completes the boot cycle. After the switch resets, the login screen appears.
220 | Chapter 7: Maintaining the System
GS108T and GS110TP Smart Switch Software Administration Manual
on page 220
on page 221