System Logs; Memory Logs - NETGEAR GS110TP - ProSafe Gigabit Smart Switch Software Administration Manual

System Logs

The switch may generate messages in response to events, faults, or errors occurring on the
platform as well as changes in configuration or other occurrences. These messages are
stored locally and can be forwarded to one or more centralized points of collection for
monitoring purposes or long term archival storage. Local and remote configuration of the
logging capability includes filtering of messages logged or forwarded based on severity and
generating component.
The Monitoring  Logs tab contains links to the following folders:
•

Memory Logs

• FLASH Log Configuration
• Server Log Configuration
on page 214
• Trap Logs
on page 215
• Event Logs
Memory Logs
The in-memory log stores messages in memory based upon the settings for message
component and severity. Use the Memory Logs page to set the administrative status and
behavior of logs in the system buffer. These log messages are cleared when the switch
reboots.
To access the Memory Log page, click the Monitoring  Logs tab, and then click the
Memory Log link.
208 | Chapter 6: Monitoring the System
GS108T and GS110TP Smart Switch Software Administration Manual
on page 208
on page 210
on page 212