Upload File From Switch - NETGEAR GS110TP - ProSafe Gigabit Smart Switch Software Administration Manual

Upload File From Switch

Use the File Upload page to upload configuration (ASCII), log (ASCII), and image (binary)
files from the switch to the TFTP server.
To display the File Upload page, click Maintenance  Upload  File Upload.
To upload a file from the switch to the TFTP server:
Use the File Type menu to specify the type of file you want to upload:
1.
Code: Uploads a stored code image.
•
Text Configuration: Uploads the text configuration file.
•
Error Log: Uploads the system error (persistent) log, sometimes referred to as the
•
event log.
Buffered Log: Uploads the system buffered (in-memory) log.
•
Trap Log: Uploads the system trap records.
•
If the file type is Code, specify whether to upload image1 or image2. This field is only visible
2.
when Code is selected as the File Type.
From the Server Address Type filed, specify the format to use for the address you type in
3.
the TFTP Server Address field:
IPv4. Indicates the TFTP server address is an IP address in dotted-decimal format.
•
DNS. Indicates the TFTP server address is a hostname.
•
In the Server Address field, specify the IP address or hostname of the TFTP server. The
4.
address you type must be in the format indicated by the TFTP Server Address Type.
In the Transfer File Path field, specify the path on the TFTP server where you want to put
5.
the file. You may enter up to 32 characters. Include the backslash at the end of the path. A
path name with a space is not accepted. Leave this field blank to save the file to the root
TFTP directory.
222 | Chapter 7: Maintaining the System
GS108T and GS110TP Smart Switch Software Administration Manual