Traffic Control; Mac Filter Configuration - NETGEAR GS110TP - ProSafe Gigabit Smart Switch Software Administration Manual

GS108T and GS110TP Smart Switch Software Administration Manual

Traffic Control

From the Traffic Control link, you can configure MAC Filters, Storm Control, Port Security,
and Protected Port settings. To display the page, click the Security  Traffic Control tab.
The Traffic Control folder contains links to the following features:
MAC Filter:
•
•

MAC Filter Configuration

• MAC Filter Summary
• Storm Control
Port Security:
•
• Port Security Configuration
• Port Security Interface Configuration
• Security MAC Address
• Protected Ports Membership
MAC Filter Configuration
Use the MAC Filter Configuration page to create MAC filters that limit the traffic allowed into
and out of specified ports on the system.
To display the MAC Filter Configuration page, click Security  Traffic Control, and then click
the MAC Filter  MAC Filter Configuration link.
on page 171
on page 173
on page 174
on page 175
on page 178
on page 179
on page 176
Chapter 5: Managing Device Security | 171