Static Mac Address - NETGEAR GS110TP - ProSafe Gigabit Smart Switch Software Administration Manual

GS108T and GS110TP Smart Switch Software Administration Manual

Static MAC Address

Use the Static MAC Address Configuration page to configure and view static MAC addresses
on an interface.
To access the Static MAC Address Configuration page, click Switching Address Table 
Advanced  Static MAC Address.
To configure a static MAC address:
To add a static MAC address entry
1.
a. Select the VLAN ID corresponding to the MAC address to add.
b. Specify the MAC address to add.
c. Specify the port associated with the MAC address.
d. Click Add.
To delete a static MAC address, select the check box next to the entry and click Delete.
2.
To modify the settings for a static MAC address, select the check box next to the entry,
3.
update the desired values, and click Apply.
Click Refresh to reload the page and display the latest MAC address learned on a specific
4.
port.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
5.
the latest value of the switch.
Chapter 3: Configuring Switching Information | 57