GS108T and GS110TP Smart Switch Software Administration Manual
Click Initialize to begin the initialization sequence on the selected port(s). This button is only
4.
selectable if the control mode is auto. If the button is not selectable, it will be grayed out.
When this button is clicked, the action is immediate. It is not required to click Apply for the
action to occur.
Click Reauthenticate to begin the reauthentication sequence on the selected port. This
5.
button is only selectable if the control mode is auto. If the button is not selectable, it will be
grayed out. When this button is pressed, the action is immediate. It is not required to click
Apply for the action to occur.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
6.
the latest value of the switch.
Port Summary
Use the Port Summary page to view information about the port access control settings on a
specific port.
To access the Port Summary page, click Security Port Authentication Advanced Port
Summary.
Chapter 5: Managing Device Security
| 169