Http File Download - NETGEAR GS110TP - ProSafe Gigabit Smart Switch Software Administration Manual

GS108T and GS110TP Smart Switch Software Administration Manual
active image.
From the Server Address Type filed, specify the format for the address you type in the
3.
TFTP Server Address field
IPv4. Indicates the TFTP server address is an IP address in dotted-decimal format.
•
DNS. Indicates the TFTP server address is a hostname.
•
In the Server Address field, specify the IP address or hostname of the TFTP server. The
4.
address you type must be in the format indicated by the TFTP Server Address Type.
In the Transfer File Path field, specify the path on the TFTP server where the file is located.
5.
You may enter up to 32 characters. Include the backslash at the end of the path. A path
name with a space is not accepted. Leave this field blank to save the file to the root TFTP
directory.
In the Remote File Name field, specify the name of the file to download from the TFTP
6.
server. You may enter up to 32 characters. A file name with a space is not accepted.
Select the Start File Transfer check box to initiate the file upload.
7.
Click Apply to begin the file transfer.
8.
The last row of the table displays information about the progress of the file transfer. The
page refreshes automatically until the file transfer completes or fails.
To activate a software image that you download to the switch, see
page 228.

HTTP File Download

Use the HTTP File Download page to download files of various types to the switch using an
HTTP session (for example, via your Web browser).
To display this page, click Maintenance  Download  HTTP File Download.
File Management
Chapter 7: Maintaining the System
on
| 225