Dumping System Information; Setting The Output Length Of Show Running-Config; Terminal Length; Terminal No Length - NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

15.7 Dumping System Information

The show tech-support command dumps all major system information into a file that can
be sent to NETGEAR product support for debugging purposes. The command output is
not displayed on the console. Use the copy command to transfer the dumped file to the
host PC.
Format
Mode

15.8 Setting the Output Length of show running-config

By default, the output of the show running-config command pauses after every 18 lines
of output. If you do not want the output to pause or you want to change the number of lines
displayed, the following commands are provided to control output behavior.

15.8.1 terminal length

This command specifies how many lines of output to display on the console before
pausing. When the value of 0 is used, the output will not pause.
Format
Mode

15.8.2 terminal no length

This command resets the number of lines displayed by the show running-config
command before pausing to the default value of 18.
Format
Mode
15-32
show tech-support
Global Config
<0-24>
terminal length
Global Config
terminal no length
Global Config
v1.0, February 2007
System Maintenance Commands