Show Policy-Map Interface (Gsm7248 Only) - NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
DiffServ Mode
The following information is repeated for interface and direction (only those interfaces
configured with an attached policy are shown):
Interface
Direction
OperStatus
Policy Name

14.6.6 show policy-map interface (GSM7248 only)

This command displays policy-oriented statistics information for the specified interface
and direction. The
system.
Note: This command is only allowed while the DiffServ administrative mode is
Format
Mode
Interface
Direction
Operational
Status
Policy Name
The following information is repeated for each class instance within this policy:
Class Name
In Discarded
Packets
14-30
The current setting of the DiffServ administrative mode. An
attached policy is only active on an interface while DiffServ
is in an enabled mode.
Valid slot and port number separated by forward slashes.
The traffic direction of this interface service.
The current operational status of this DiffServ service inter-
face.
The name of the policy attached to the interface in the indi-
cated direction.
<unit/slot/port>
enabled.
show policy-map interface <unit/slot/port> [in]
Privileged EXEC
Valid slot and port number separated by forward slashes.
The traffic direction of this interface service.
The current operational status of this DiffServ service inter-
face.
The name of the policy attached to the interface in the indi-
cated direction.
The name of this class instance.
A count of the packets discarded for this class instance for
any reason due to DiffServ treatment of the traffic class.
v1.0, February 2007
parameter specifies a valid interface for the
Quality of Service (QoS) Commands