Ip Igmpsnooping Querier Query-Interval; Show Ip Igmpsnooping Querier - NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

13.3.3 ip igmpsnooping querier query-interval

To configure the IGMP querier query interval <interval> for a VLAN <vlan-id>, use the
ip igmpsnooping querier query-interval command. Valid range for <interval> is 1 to
18000 seconds. <Vlan-id> must be a defined VLAN.
Format
Mode
Default

13.3.4 show ip igmpsnooping querier

To display IGMP querier configuration information use show ip igmpsnooping querier
command. To display global querier information use show ip igmpsnooping querier. To
display VLAN specific querier information with the <vlan-id> option,
Format
Mode
IGMP Snooping Commands
[no] ip igmpsnooping querier query-interval
id> <interval>
Global Config
interval, 60
show ip igmpsnooping querier
Privileged EXEC Mode
v1.0, February 2007
<vlan-
[<vlan-id>]
13-11