Shutdown All; Speed - NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
4.1.9.1 no shutdown
This command enables a port.
Note: You can use the
Format
Mode

4.1.10 shutdown all

This command disables all ports.
Note: You can use the
Default
Format
Mode
4.1.10.1 no shutdown all
This command enables all ports.
Note: You can use the
Format
Mode

4.1.11 speed

This command sets the speed and duplex setting for the interface.
Format
Mode
Port and System Setup Commands
no shutdown
(LAG) interfaces, but not on VLAN routing interfaces.
no shutdown
Interface Config
shutdown
interfaces, but not on VLAN routing interfaces.
enabled
shutdown all
Global Config
shutdown
interfaces, but not on VLAN routing interfaces.
no shutdown all
Global Config
speed {<100 | 10> <half-duplex | full-duplex>}
Interface Config
v1.0, February 2007
command on physical and port-channel
command on physical and port-channel (LAG)
command on physical and port-channel (LAG)
4-5