Packet Capture; Capture Transmit Packet; Capture Receive Packet - NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Format
Mode

15.6 Packet Capture

Packet capture commands assist in troubleshooting protocol-related problems with the
management CPU. The packets to and from the management CPU can be captured in an
internally allocated buffer area for export to a PC host for protocol analysis. Public domain
packet analysis tools like Ethereal can be used to decode and review the packets in detail.
Capturing can be performed in a variety of modes, either transmit-side only, receive-side
only, or both. The number of packets captured will depend on the size of the captured
packets.

15.6.1 capture transmit packet

This command enables the capturing of transmit packets.
Format
Mode
15.6.1.1 no capture transmit packet
This command disables the capturing of transmit packets.
Format
Mode

15.6.2 capture receive packet

This command enables the capturing of receive packets.
Format
Mode
15.6.2.1 no capture transmit packet
This command disables the capturing of transmit packets.
Format
Mode
15-30
script validate <scriptname>
Global Config
capture transmit packet
Global Config
no capture transmit packet
Global Config
capture receive packet
Global Config
no capture receive packet
Global Config
v1.0, February 2007
System Maintenance Commands