Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
14.4.10 policy-map rename
This command changes the name of a DiffServ policy. The
an existing DiffServ class. The
alphanumeric string from 1 to 31 characters uniquely identifying the policy.
Format
Mode
14.5 DiffServ Service Commands (GSM7248 only)
Use the DiffServ service commands to assign a DiffServ traffic conditioning policy, which
you specified by using the policy commands, to an interface in the incoming direction
The service commands attach a defined policy to a directional interface. You can assign
only one policy at any one time to an interface in the inbound direction. DiffServ is not
used in the outbound direction.
This set of commands consists of service addition/removal.
The CLI command root is
Quality of Service (QoS) Commands
<newpolicyname>
policy-map rename <policyname> <newpolicyname>
Global Config
.
service-policy
v1.0, February 2007
<policyname> i
parameter is a case-sensitive
s the name of
14-23