Bootpdhcprelay; Bootpdhcprelay Maxhopcount - NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Default
Format
Mode
7.4.1.1 no ip dhcp relay information option
This command disables the relay information option mode for BootP/DHCP Relay on the
system.
Format
Mode

7.4.2 bootpdhcprelay

This command enables the forwarding of relay requests for BootP/DHCP Relay on the
system.
Default
Format
Mode
7.4.2.1 no bootpdhcprelay enable
This command disables the forwarding of relay requests for BootP/DHCP Relay on the
system.
Format
Mode

7.4.3 bootpdhcprelay maxhopcount

This command configures the maximum allowable relay agent hops for BootP/DHCP
Relay on the system. The
Default
Format
Mode
7-16
disabled
ip dhcp relay information option
Global Config
no ip dhcp relay information option
Global Config
disabled
bootpdhcprelay
Global Config
no bootpdhcprelay enable
Global Config
parameter has a range of 1 to 16.
<hops>
4
bootpdhcprelay maxhopcount <1-16>
Global Config
v1.0, February 2007
DHCP Commands