NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual page 249

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
ACL ID
Sequence
Number
Quality of Service (QoS) Commands
Access List name for a MAC access list or the numeric iden-
tifier for an IP access list.
An optional sequence number may be specified to indicate
the order of this access list relative to other access lists
already assigned to this interface and direction. A lower num-
ber indicates higher precedence order. If a sequence number
is already in use for this interface and direction, the specified
access list replaces the currently attached access list using
that sequence number. If the sequence number is not speci-
fied by the user, a sequence number that is one greater than
the highest sequence number currently in use for this inter-
face and direction is used. Valid range is (1 to 4294967295).
v1.0, February 2007
14-39