Ip Host; Clear Host; Show Hosts - NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

4.5.4 ip host

To define static host name <name> to IP address <address> mapping in the host cache,
use the ip host global configuration command. The <name> string is from 1 to 255
characters. To remove the name-to-address mapping, use the no form of this command.
Format
Mode

4.5.5 clear host

To delete entries from the host name-to-address cache, use the clear host Privileged
EXEC command
Format
Mode

4.5.6 show hosts

To display the default domain name, a list of name server hosts, the static and the cached
list of host names and addresses, use the show hosts EXEC command.
Format
Mode
Port and System Setup Commands
[no] ip host
Global Config
.
clear host
Privileged EXEC Mode
show hosts
Privileged EXEC Mode
v1.0, February 2007
name address
[name | *]
[name]
4-27