Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
15.6.3 capture all packets
This command enables the capturing of both transmit and receive packets.
Format
Mode
15.6.3.1 no capture all packets
This command disables the capturing of transmit and receive packets.
Format
Mode
15.6.4 capture wrap
This command enables the Buffer Wrapping configuration. Once the capture buffer is full,
writes to the buffer will wrap around to allow continuous packet caputure.
Format
Mode
Default
15.6.4.1 no capture all packets
This command disables the Buffer Wrapping configuration.
Format
Mode
15.6.5 show capture packets
This command displays packets being captured from the buffer. The output of the show
command can be redirected to a text file. The resultant text file can be fed to the text2pcap
utility or the Ethereal public domain packet analyzer, which can then be translated to a cap
file
Format
Mode
System Maintenance Commands
capture all packets
Global Config
no capture all packets
Global Config
capture wrap
Global Config
Enabled
no capture wrap
Global Config
show capture packets
Global Config
v1.0, February 2007
15-31