Clear Config; Clear Counters; Clear Igmpsnooping; Clear Pass - NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

15.2.2 clear config

This command resets the configuration to the factory defaults without powering off the
switch. When you issue this command, a prompt appears to confirm that the reset should
proceed. When you enter
Format
Mode

15.2.3 clear counters

This command clears the statistics for a specified
the entire switch based upon the argument.
Format
Mode

15.2.4 clear igmpsnooping

This command clears the tables managed by the IGMP Snooping function and attempts to
delete these entries from the Multicast Forwarding Database.
Format
Mode

15.2.5 clear pass

This command resets all user passwords to the factory defaults without powering off the
switch. You are prompted to confirm that the password reset should proceed.
Format
Mode

15.2.6 enable passwd

This command prompts you to change the Privileged EXEC password.
Format
Mode
15-18
, you automatically reset the switch.
y
clear config
Privileged EXEC
clear counters {<slot/port> | all}
Privileged EXEC
clear igmpsnooping
Privileged EXEC
clear pass
Privileged EXEC
enable passwd
User EXEC
v1.0, February 2007
for all the ports, or for
<slot/port>,
System Maintenance Commands