Configuring Daylight Saving Time - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

Basic Administration of the SPA9000
Configuring Basic Settings
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
SPA9000 Voice System Administration Guide
Do not use the date/time settings on the Voice > Regional page to set your system
time.
Connect to the SPA9000 administration web server, and choose Admin access
with Advanced settings. (See
Server," on page 27).
Click Router tab > Wan Setup.
Scroll down to the Optional settings section.
Enter the fully qualified domain name of the NTP server that you want to use, such
as time.nist.gov.
Click Submit All Changes.
Click Voice tab > Regional.
Scroll down to the Miscellaneous section.
From the Time Zone drop-down list, choose your local time zone.
Click Submit All Changes.

Configuring Daylight Saving Time

You can enter a daylight saving time rule to ensure that the time is adjusted
appropriately for your region.
Syntax and Examples
SYNTAX: start = <start-time>; end=<end-time>; save = <save-
time>
EXAMPLE: start=3/9/7;end=11/2/7;save=1
In this example, Daylight Saving Time begins March 9, 2007, and ends Nov. 2, 2007.
One hour is added to the time of day during this period.
•
<start-time>: The start date/time of daylight saving time
•
<end-time>: The end date/time of daylight saving time
"Connecting to the SPA9000 Administration Web
2
31