Entering A Call Routing Rule - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

Configuring Phone Lines and Calling Routing Behavior
Managing the Line Selection for Outbound Calls
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
SPA9000 Voice System Administration Guide
•
Wildcard characters
EXAMPLE: (<:L1>51*,577?)
In this example, Line 1 can be used when either of the following number
patterns is dialed:
•
The user dials a number that starts with 51, followed by any other
characters.
•
The user dials any four-digit number starting with 577.

Entering a Call Routing Rule

Use the following procedure to enter a call routing rule.
Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin
Login and then click Advanced.
Click Voice tab > SIP.
Scroll down to the PBX Parameters section.
In the Call Routing Rule field, enter the rule that you want to apply
Click Submit All Changes.
To verify your progress, place a call to a phone that has caller ID, and confirm that
the expected number appears.
4
81