Cisco SPA-841 - Sipura VoIP Phone Administration Manual page 242

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
Detect ABCD
Playback ABCD
Caller ID Method
Caller ID FSK Standard
Feature Invocation
Method
To enable local detection of DTMF ABCD, select yes.
Otherwise, select no. Setting has no effect if DTMF Tx
Method is INFO; ABCD is always sent OOB regardless in this
setting.
Default: yes
To enable local playback of OOB DTMF ABCD, select yes.
Otherwise, select no.
Default: yes
The following choices are available:
Bellcore (N.Amer,China)—CID, CIDCW, and VMWI. FSK sent
after first ring (same as ETSI FSK sent after first ring) (no
polarity reversal or DTAS).
DTMF (Finland, Sweden)—CID only. DTMF sent after polarity
reversal (and no DTAS) and before first ring.
DTMF (Denmark)—CID only. DTMF sent after polarity reversal
(and no DTAS) and before first ring.
ETSI DTMF—CID only. DTMF sent after DTAS (and no polarity
reversal) and before first ring.
ETSI DTMF With PR—CID only. DTMF sent after polarity
reversal and DTAS and before first ring.
ETSI DTMF After Ring—CID only. DTMF sent after first ring
(no polarity reversal or DTAS).
ETSI FSK—CID, CIDCW, and VMWI. FSK sent after DTAS (but
no polarity reversal) and before first ring. Waits for ACK from
CPE after DTAS for CIDCW.
ETSI FSK With PR (UK)—CID, CIDCW, and VMWI. FSK is sent
after polarity reversal and DTAS and before first ring. Waits
for ACK from CPE after DTAS for CIDCW. Polarity reversal is
applied only if equipment is on hook.
Default: Bellcore(N.Amer, China)
The SPA9000 supports bell 202 and v.23 standards for caller
ID generation. Select the FSK standard you want to use, bell
202 or v.23.
Default: bell 202
Select the method you want to use, Default or Sweden
default.
Default: Default
B
240