Cisco SPA-841 - Sipura VoIP Phone Administration Manual page 120

Administering the SPA400 and Voice Mail Service
Configuring a SPA400 for Voice Mail Service
STEP 6
STEP 7
STEP 8
STEP 9
SPA9000 Voice System Administration Guide
SPA400 > Setup > Voicemail Users
Click Submit All Changes. The phone reboots.
Close the browser window for this station.
Return to the browser window that shows the list of stations, and then repeat this
procedure for each station that you need to configure.
When you finish configuring stations, you can click the Back button on the
NOTE
browser toolbar to return to the main web configuration page.
To verify your progress, perform the following tasks:
•
Station Name: Verify that the station name appears on the phone display and
in the list of stations on the PBX Status page.
•
Mailbox Status: Connect to the SPA9000 administration web server, and
choose Admin access with Advanced settings. Click Voice tab > Line 2. In the
Proxy and Registration section, check the Mailbox Status field. You should see
a listing for each extension that you configured with voice mail. Refer to the
following example.
Phone Configuration > Ext N
5
118