Cisco SPA-841 - Sipura VoIP Phone Administration Manual page 43

Basic Administration of the SPA9000
Using the Interactive Voice Response Unit
STEP 6
SPA9000 Voice System Administration Guide
For example, to enter the IP address
following keys: 191*168*1*105. Press the # (pound) key to indicate that you
have finished entering the IP address. Then press 1 to save the IP address, or
press the * (star) key to cancel your entry and return to the main menu.
•
If the menu is inactive for more than one minute, the
need to re-enter the menu by pressing ****.
To exit the menu, hang up the telephone.
The settings that you have saved take effect after you hang up the telephone. The
may reboot at this time.
SPA9000
Table 1 IVR Options
The following table shows the codes that you enter to complete various tasks in
the IVR.
IVR Action IVR
Menu
Choice
Enter IVR Menu * * * *
Exit IVR Menu 3948
Check DHCP 100
Enable/Disable 101
DHCP
Check WAN IP 110
Address
191. 1 68. 1 . 1 05
Parameters
None
None
None
Enter 0 to enable
Enter 1 to disable
None
by keypad, press the
times out. You
SPA9000
Notes
Ignore SIT or other tones
until you hear, "Linksys
configuration menu. Please
enter option followed by
the pound key or hang-up
to exit."
The IVR spells "S,T,A,T,I,C" if
the setting is for a static IP
address or "D,H,C,P" for a
DHCP IP address.
Requires password
IVR announces the current
IP address of the WAN port.
2
41