Configuring Phone Lines and Calling Routing Behavior
Configuring Line Interfaces on the SPA9000
STEP 8
SPA9000 Voice System Administration Guide
Click Submit All Changes. The SPA9000 device reboots.
You need to configure the SPA400 with the corresponding settings. See
NOTE
"Configuring Local Voice Mail Service on a SPA400," on
Configuring Call Capacity for a Line Interface
Each line interface has a limited number of simultaneous calls that are allowed,
based on the Call Capacity parameter. When the maximum call capacity is
reached, the SPA9000 does not allocate any more calls to that line interface.
This section includes the following topics:
•
"Bandwidth Requirements and Call Capacity," on page 64
•
"Setting the Call Capacity Parameter," on page 65
SPA9000 Voice > Line
4
page113.
63