Cisco SPA-841 - Sipura VoIP Phone Administration Manual page 211

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
•
Dynamic Payloads: The configured dynamic payloads are used for outbound
calls only where the
SDP offer, the
SPA9000
•
Codec Names: The
SDP. The
SPA9000
payload types (0 – 95). For dynamic payload types, the
codec by the configured codec names. Comparison is case-insensitive.
NSE Dynamic Payload
AVT Dynamic Payload
INFOREQ Dynamic
Payload
G726r16 Dynamic
Payload
G726r24 Dynamic
Payload
G726r40 Dynamic
Payload
G729b Dynamic Payload
NSE Codec Name
AVT Codec Name
G711u Codec Name
G711a Codec Name
G726r16 Codec Name
presents the SDP offer. For inbound calls with a
SPA9000
follows the caller dynamic payload type assignments.
uses the configured codec names in its outbound
SPA9000
ignores the codec names in incoming SDP for standard
NSE dynamic payload type. The valid range is 96-127.
Default: 100
AVT dynamic payload type. The valid range is 96-127.
Default: 101
INFOREQ dynamic payload type.
Default: blank
G.726-16 dynamic payload type. The valid range is 96-127.
Default: 98
G.726-24 dynamic payload type. The valid range is 96-127.
Default: 97
G.726-40 dynamic payload type. The valid range is 96-127.
Default: 96
G.729b dynamic payload type. The valid range is 96-127.
Default: 99
NSE codec name used in SDP.
Default: NSE
AVT codec name used in SDP.
Default: telephone-event
G.711u codec name used in SDP.
Default: PCMU
G.711a codec name used in SDP.
Default: PCMA
G.726-16 codec name used in SDP.
Default: G.726-16
B
identifies the
SPA9000
209