Cisco SPA-841 - Sipura VoIP Phone Administration Manual page 260

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
DNS SRV Auto Prefix
Proxy Fallback Intvl
Proxy Redundancy
Method
Mailbox Status
Mailbox Subscribe URL
Mailbox Deposit URL
Mailbox Subscribe
Expires
If enabled, the SPA9000 will automatically prepend the Proxy
or Outbound Proxy name with _sip._udp when performing a
DNS SRV lookup on that name.
Default: no
This parameter sets the delay (sec) after which the SPA9000
will retry from the highest priority proxy (or outbound proxy)
servers after it has failed over to a lower priority server. This
parameter is useful only if the primary and backup proxy
server list is provided to the SPA9000 via DNS SRV record
lookup on the server name. (Using multiple DNS A record per
server name does not allow the notion of priority and so all
hosts are considered at the same priority and the SPA9000
will not attempt to fall back after a fail over).
Default: 3600
SPA9000 will make an internal list of proxies returned in DNS
SRV records. In normal mode, this list will contain proxies
ranked by weight and priority.
If based on SRV, the port is configured, the SPA9000 does
normal first and also inspects the port number based on 1
proxy's port in the list.
Default: Normal
The status of the connection to the voice mail server
Mailbox status for all the mailboxes associated with this line
interface. The status is automatically updated when the
SPA9000 receives voicemail status notification from the ITSP.
mbs mbs mbs
Format: [ [, [,
mbs mbid new old
= : /
mbid
= mailbox ID, such as 12345
new
= number of new messages in mailbox: 0,1,2,...
old
= number of old messages in mailbox: 0, 1, 2, ...
This parameter allows $USER and $PROXY macros, such as
$USER@$PROXY
This parameter allows $USER, $PROXY, and $MBID macros,
such as $USER@$PROXY, or $MBID@$PROXY.
Default: blank
Identifies when the mailbox subscription expires.
Recommended: 30
[,...]]]] where:
B
st
258