Subscriber Information Section; Dial Plan Section - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
Referor Bye Delay
Refer Target Bye Delay
Referee Bye Delay
Refer-To Target Contact
Sticky 183
Voice tab > FXS 1/2 page

Subscriber Information section

Display Name
User ID
Voice tab > FXS 1/2 page

Dial Plan section

Dial Plan
Controls when the SPA9000 sends BYE to terminate stale call
legs after completion of call transfers. Multiple delay settings
(Referor, Refer Target, Referee, and Refer-To Target) are
configured on this screen. For the Referor Bye Delay, enter
the appropriate period of time in seconds.
Default: 4
For the Refer Target Bye Delay, enter the appropriate period
of time in seconds.
Default: 0
For the Referee Bye Delay, enter the appropriate period of
time in seconds.
Default: 0
To contact the refer-to target, select yes. Otherwise, select
no.
Default: no
If this feature is enabled, the IP telephony ignores further 180
SIP responses after receiving the first 183 SIP response for
an outbound INVITE. To enable this feature, select yes.
Otherwise, select no.
Default: no
Display name for caller ID.
Extension number for this line.
Dial plan script for this line.
B
244