Cisco SPA-841 - Sipura VoIP Phone Administration Manual page 34

Basic Administration of the SPA9000
Configuring Basic Settings
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
SPA9000 Voice System Administration Guide
Enter these values in the following format: <month>/<day>/<weekday>[/
HH[:mm[:ss]]]
•
<month>: 1-12 (January-December)
•
<day>: 1-31
•
<weekday>: Optional. If included, this value causes the rule to take effect on
a particular day of the week before or after the specified date. Use the
values 1-7 to represent the days Monday (1) through Sunday (7). Omit this
parameter or enter 0 to cause the rule to take effect exactly on the specified
date. If <weekday> is not 0 and the <day> value is positive, then daylight
saving time starts or ends on <weekday> on or after the specified date. If
<weekday> is not 0 and the <day> value is negative, then daylight saving
time starts or ends on <weekday> on or before the specified date.
•
HH:mm:ss: Optional. The time of day when the setting takes effect, in hours
(0-23), minutes (0-59), and seconds (0-59)
•
<save-time>: The number of hours (and optionally minutes and/or seconds)
to add to the NTP server time during daylight saving time. Enter a negative (-)
sign before <save-time> if subtraction is desired instead of addition.
Entering the Daylight Saving Time Rule
Follow this procedure to configure daylight saving time on your SPA9000 Voice
System.
Connect to the SPA9000 administration web server, and choose Admin access
with Advanced settings. (See
Server," on page 27).
Click Voice tab > Regional.
Scroll down to the Miscellaneous section.
Enter the rule in the Daylight Saving Time Rule field.
Click Submit All Changes.
"Connecting to the SPA9000 Administration Web
2
32