Entering A Contact List Rule - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

Configuring Phone Lines and Calling Routing Behavior
Managing Inbound Calls with the Contact List
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
SPA9000 Voice System Administration Guide

Entering a Contact List Rule

Use the following procedure to enter a contact list rule.
Connect to the SPA9000 administration web server, and choose Admin access
with Advanced settings.
Click Voice tab > Line
Scroll down to the Subscriber Information section.
Enter the desired rules in the Contact List field. For more information, see
Contact List Rules," on page 86
The maximum length of the <Contact List> parameter is 383 characters.
NOTE
If you included a call forward rule, modify the
specify the number of seconds that elapse before a call is considered to be
unanswered.
Click Submit All Changes. The SPA9000 reboots.
To verify your progress, make an inbound call and verify that the call is handled as
you intended.
N
, where N represents the line interface number.
SPA9000 Voice > Line: Subscriber Information
and "Entering a Contact List Rule," on page
Cfwd No Ans Delay
parameter to
4
"Example
91.
91