Cisco SPA-841 - Sipura VoIP Phone Administration Manual page 36

Basic Administration of the SPA9000
Configuring Basic Settings
STEP 1
STEP 2
STEP 3
STEP 4
SPA9000 Voice System Administration Guide
Setting the Multicast Address
For administration purposes, the SPA9000 can send the following reboot, restart,
page, and ring messages to the group:
•
Graceful reboot: The device reboots when there are no calls in progress.
•
Immediate reboot: The device reboots immediately.
•
Graceful restart: The device restarts when there are no calls in progress.
•
Immediate restart: The device restarts immediately.
•
Group page start: One-way audio is sent from the caller to all other phones.
•
Group page end: An active page is terminated.
•
Get ringing calls: When a user chooses Group Pickup on a phone, the SPA9000
gathers information about all ringing phones and reports this information to the
requesting phone.
Connect to the SPA9000 administration web server, and choose Admin access
with Advanced settings. (See
Server," on page 27).
Click Voice tab > SIP.
Scroll down to the PBX Parameters section.
Enter the correct multicast address in the Multicast Address field.
The default value is 224. 1 68. 1 68. 1 68:6061.
NOTE
"Connecting to the SPA9000 Administration Web
Voice tab > SIP > PBX Parameters Section
2
34